Home / Phone Flashing Tools / How To Flash Or Upgrade Amlogic Devices With SDcard Using Amlogic Burn Card Maker

How To Flash Or Upgrade Amlogic Devices With SDcard Using Amlogic Burn Card Maker

With amlogic burn card maker you can flash or upgrade your amlogic device, And it such a simple and easy to flash your amlogic device with this burn card maker. Which requires an SD card (external memory card).

Today I will teach you how to flash or upgrade your amlogic device with amlogic burn card maker, with an SD card. This will be done directly with amlogic USB burning tool.


How to flash or upgrade Amlogic device with amlogic Burn Card Maker

Follow the simple steps below……

Download amlogic burn card maker to your computer from here and install it and open it.
Step 1.. Get an SD that is empty because the SD card will formated during flashing/ading. Now Insert your SDcard into a USB card reader and connect to your computer.

Step 2… Run Burn_Card_Maker.exe as administrator.
If you wanna change the app from Chinese to English, click on the Chinese menu at the top then click on the second option and click English Version, restart the app and run again as administrator

Step 3… Now you see a drop-down menu with the label choose disk, look for the SD card you want to burn the image to.

Now tick the following options below;

erase_flash (select erase in normal)

Step 4… You will now see an option to choose your image files, Click on the Open button to browse the folder where your downloaded firmware is located and then select the firmware image file which should have the .img as file extension of the Amlogic device you want to flash or upgrade.

Step 5… After you must have selected the image (.img) file, click on the Make button. You will see a pop-up telling you SDcard will be formatted. Click OK. After formatting the SDcard, click done. Burning image to SDcard will begin immediately. This process usually takes about 10 minutes to complete.

You are almost done just insert the micro SD card into the Amlogic device then switch it on. The amlogic device will enter into recovery mode, and flash/upgrade process will begin immediately. When it’s done, the device will reboot. Remove the SDcard from the device then wait for remaining update process to finish.

DON’T MISS: Download Amlogic_Burn Card_Maker v2.0.2 For PC

Love what you see here kindly share this post below if it was helpful. Enjoy

About Admin

Leave a Reply

Your email address will not be published. Required fields are marked *